Honda Insight Trailer Hitch Installation And Review Videos

Curt Trailer Hitch Installation - 2010 Honda Insight- Video

Today on our 2010 Honda Insight, we're gonna be taking a look at and showing you how to install the Curt class one custom fit trailer hitch receiver. So here's what our hitch looks like once we have it installed. It is gonna sit right below our bumper and the receiver tubes gonna be pretty close to being flush with the rear bumper here.Our hitch is gonna be a class one, which means it's gonna give us that inch and a quarter by inch and a quarter receiver tube opening and it's gonna be great for accessories like bike rakes and cargo carriers. And the way we're gonna mount any of our accessories is through the hitch pin hole here on the side. Our hitch is gonna accept a standard half inch pin and clip. Now these are not included in the kit, but you can pick them up here at etrailer.com, along with some locking devices to make sure your accessories are secure.Now if you do plan on doing some light duty towing, our safety chain connection points can be a plate style welded to the bottom. more

2/1/2019 9:33:19 AM

Trailer Hitch Installation - 2011 Honda Insight - Curt- Video

Today on this 2011 Honda Insight were going to install part number 11051 from Curt. This is what the hitch looks like once its installed on the car. Next well give you some measurements to help you out in selecting some accessories such as a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 12 inches. From the center of the hitch pin hole to the edge of the bumper will be about four and a quarter inches. Now Ill go ahead and show you how the hitch is installed. more

2/22/2013 10:11:58 AM